Payment & Shipping Terms:
|With Modem Function::||No||Supports WDS::||No|
|Supports WPS::||Yes||Max. LAN Data Rate::||300Mbs|
|Wi-Fi Transmission Rate::||300 Mbps||Wi-Fi Transmission Standard::||802.11n|
|Standards And Protocols::||Wi-Fi 802.11g,Wi-Fi 802.11b,Wi-Fi 802.11n||Number Of USB Interfaces::||No Support|
|Wi-Fi Supported Frequency::||2.4G|
Wifi Repeater [OEM] WLAN Network Repeater Booster 300Mbps 802.11 Wireless WiFi Range ExtenderWifi Repeater
This high quality WiFi Repeater, also called a range extender is used to broaden range of your WiFi network.
A WiFi repeater works by receiving the WiFi signal from a router and then amplifying and re-broadcasting it around locally.
With a WiFi repeater, computers and printers that are located out of the original range of the access point can access the extended wifi network.
The WiFi repeater effectively doubles the coverage area of your existing WiFi network, extend your network to the far end of your home or office, you just need to place it half way between the computers and router.
Supports Repeater and AP Mode
Software wizard for simple setup
Wireless Auto-Channel selection
Frequency Range: 2.4-2.4835GHz
Supports WiFi Protection Setup (WPS)
Supports WEP, TKIP and AES Encryption
Provides up to 300Mbps transmission rates
Newest Win 8 Style Configuration Interface
WLAN 802.11n for wireless high-speed access
Strongest Airgain + Metal onboard PCBA Antenna
Supports configuration file backup and restore
Improves wireless coverage in all WLAN networks
Supports the various WiFi shared the longer range
Maximum WLAN security with WPA2, WPA and WEP(128/ 64)
The WPS function eases your life and ensures the safety of your network.
Downward compatible with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
Additional WPS button (Wi-Fi Protected Setup) makes it more convenient to encrypt wireless network data transmission, and to prevent invasion of illegal users.
For iPhone/iPad, Smart Phone USER:
Turn off your iPhone's and laptop's wireless completely.
There is a small reset button on your repeater. Press it and keep it pressed 10 seconds.
Have patience here and watch its lights go off and then on. Let it alone 2-5 minutes.
Turn on WiFi and search for wireless network named "Wifi Repeater".
Connect to it regardless of not having internet connection yet.
Type in the address bar this: 192.168.10.1/home.asp
It will ask you username and password
The username: admin
The password: admin
This is the Wifi Repeater's little setup software.
Click on Setup Wizard.
Choose Wireless Repeater Mode then click next
Then you will see a list of wireless networks which yours will be there
Press "Select" on your SKYXXXXX.
It will ask for your wireless network password. Add it.
Save and reboot.
Now, hopefully if all went smooth, now you will have a single wireless signal, but stronger in other room. Note that the Wifi Repeater name will disappear and you will see only SKYXXXXX in your house.
If you fail, just repeat from the step where you reset the Wifi Repeater from button - to factory defaults.
Make sure the Repeater is placed in a location where it can receive a strong signal from your desired wireless Internet connection. The Repeater will not work without a signal that it can repeat
The wireless signal rate is based on IEEE standard of 802.11b, g, n chipset used. Actual throughput may vary. Network conditions and environmental factors lower actual throughput rate. All specifications are subject to change without notice.
1 x 300mbps WiFi Repeater
1 x RJ45 Cable
1 x User Manual